Used Truss
FT34 truss - box truss with 290 x 290 mm (12 in x 12 in) outside dimensions, main pipe Ø 50 x 2 mm (2 in x 0.08 in), braces Ø 20 x 2 mm (0.8 in x 0.08 in). The alloy used as material for the pipes is EN AW-6082 T6.
FT23 truss- triangle truss with 220 x 195 mm ( 8.66 in x 7.58 in) outside dimensions, main pipe Ø 35 x 2 mm (1.4 in x 0.08 in), braces Ø 8 mm (0.3 in). The alloy used as material for the pipes is EN AW-6060 T66.
Tower 05 - made of HT34 straight truss pieces and Tower 05 set including outriggers, hand winch, sleeve block and top section
Wind Management
Wind resistence is calculated with 3 side mesh canopies applied to the structure (2 side canopies and one rear canopy). The three roof walls carrying canopies must be secured by guy wire cross bracing at all times as well as the top grid horizontal ceiling.
Side walls guy wires min. loading capacity - 1700 kg (3748 lb)
Rear wall guy wires min. loading capacity - 2600 kg (5732 lb)
Roof ceiling guy wires min. loading capacity - 1000 kg (2205 lb)
Please note that tension capacity of guy wires needs to be higher than required min. loading capacity.
In service max. allowed windspeed - 20 m/s - 72 km/h - 45 mph
Ballast
Option 1 - 2200 kg / 4850 lb ballast underneath each tower base = total of 8800 kg / 19,400 lb
Canopy and Side Walls
Top canopy is available standardly in silver grey and black color. The material used is SIO-LINE B 8000 with weight of 630 g/m2.
The side walls are covered by air permeable mesh canopies in black.
Transportation Data
Total weight: ca. 600 kg (1323 lb)
Transport volume: ca.
All truss segments are packed in brown carton boxes for better handling and protection during transport.